Hydro-Torq XL Synthetic Hydraulic Oil

Hydro-Torq XL: Extended Life

Synthetic Hydraulic Oil

For Chemical Emergency
Spill Leak Fire Exposure or Accident
Call CHEMTREC Day or Night


DOMESTIC NORTH AMERICA 800-424-9300
INTERNATIONAL, CALL 703-527-3887 (collect calls accepted)

Hydro-Torq Product Specification Sheet Download PDF

Synthetic Hydraulic Oil - SAE 5W-30
Specially formulated to meet the needs of Ventrac's high efficiency hydraulic and hydrostatic-drive systems, Ventrac's "Hydro-Torq XL" full synthetic hydraulic oil provides superior lubrication over an extended duty cycle.
  • Remains stable at temperature extremes
  • Maintains film strength at high pressures
  • Extremely resistant to oil oxidation & breakdown
  • Excellent cold weather startup protection
  • Superior anti-wear capabilities
Product Code # 15.0032

Technical Properties:

Ventrac "Hydro-Torq XL" Synthetic Hydraulic Oil
SAE Grade 5W-30 Viscosity Index
(ASTM D 2270)
160
Viscosity, cSt @ 40ºC
(ASTM D 445)
58.21 Pour Point ºC (º F)
(ASTM D 97)
-44 (-47)
Viscosity, cSt @ 100ºC
(ASTM D 445)
10.03 Flash Point ºC (º F)
(ASTM D 92)
242 (468)

* View Safety Data Sheets


Material Safety Data Sheet (MSDS) Download PDF

Section 1: Product & Company Identification [ Return to Top ]

COMPANY:
Venture Products Inc.
500 Venture Drive
Orrville, Ohio 44667


Telephone:
CHEMTREC - Spill Emergency Only 1-800-424-9300
INTERNATIONAL 703-741-5970 (collect calls accepted)
Information: 330-682-0075


VENTRAC Product Code: 15.0032, 15.0032-01, 15.0032-05, 15.0032-55

Product Label Name: Hydro-Torq XL Synthetic Hydraulic Oil SAE 5W-30

Product Use: Lubricating Fluid

Section 2: Hazards Identification [ Return to Top ]

OSHA/HCS Status:

This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

Classification of the Substance or Mixture:

SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2
AQUATIC HAZARD (ACUTE) - Category 3
AQUATIC HAZARD (LONG-TERM) - Category 3 Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 2.3%
Percentage of the mixture consisting of ingredient(s) of unknown hazards to the aquatic environment: 8.3%

GHS Label Elements

Hazard Pictograms:

Signal Word

Warning

Hazard Statements:

Causes serious eye irritation. Harmful to aquatic life with long lasting effects.

Precautionary Statements

Prevention:

Wear eye or face protection. Avoid release to the environment. Wash hands thoroughly after handling.

Response:

IF IN EYES: Rinse cautiously with water for several minutes.
Remove contact lenses, if present and easy to do. Continue rinsing.
If eye irritation persists: Get medical attention.

Storage:

Causes serious eye irritation. Harmful to aquatic life with long lasting effects. Not applicable.

Disposal:

Dispose of contents and container in accordance with all local, regional, national and international regulations.

Hazards Not Otherwise Classified:

None known.

Section 3: Composition/Information on Ingredients [ Return to Top ]


Substance/Mixture:

Mixture

Other Means of Identification:

Not available.

CAS Number/Other Identifiers

CAS Number:

Not applicable.

United States

Ingredient Name

Percent

CAS Number

Base Oil(s)*
Methacrylate Copolymer
Mineral Oil
Benzene, Polypropene Derivatives, Sulfonated, Calcium Salts
Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate)
2-hydroxy-4-tetradecyl-1,3,2-dioxaborolane
Triphenyl Phosphite
30 - 60
5 - 10
1 - 5
1 - 5
1 - 5
0.1 - 1
0.1 - 1
See Below
-
-
-
4259-15-8
84819-41-0
101-02-0

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.

Occupational exposure limits, if available, are listed in Section 8.

*Base Oil(s): 64742-54-7

Section 4: First Aid Measures [ Return to Top ]

Description of Necessary First Aid Measures

Eye Contact:

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids.
Check for and remove any contact lenses. Continue to rinse for at least 20 minutes. Get medical attention.

Inhalation:

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. If unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Get medical attention if symptoms occur.

Skin Contact:

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Get medical attention if symptoms occur.

Ingestion:

Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.

Most Important Symptoms/Effects, Acute and Delayed

Potential Acute Health Effects

  • Eye Contact: Causes serious eye irritation.
  • Inhalation: No known significant effects or critical hazards.
  • Skin Contact: No known significant effects or critical hazards.
  • Ingestion: Irritating to mouth, throat and stomach.

Over-Exposure Signs/Symptoms

  • Eye Contact: Adverse symptoms may include the following: pain or irritation, watering, redness.
  • Inhalation: No known significant effects or critical hazards.
  • Skin Contact: No known significant effects or critical hazards.
  • Ingestion: No known significant effects or critical hazards.

Indication of immediate medical attention and special treatment needed, if necessary

  • Notes to Physician: Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled.
  • Specific Treatments: No specific treatment.
  • Protection of First-Aiders: No action shall be taken involving any personal risk or without suitable training.
    It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.

Section 5: Fire Fighting Measures [ Return to Top ]

Extinguishing Media

Suitable
Extinguishing Media:

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable
Extinguishing Media:

None known.

Specific Hazards Arising from the Chemical:

This material is harmful to aquatic life with long lasting effects.
Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.

Hazardous Thermal Decomposition Products:

Decomposition products may include the following materials:
Carbon Dioxide Carbon Monoxide Sulfur Oxides Phosphorus Oxides

Special Protective Actions for Fire-Fighters:

No special protection is required.

Special Protective Equipment for Fire-Fighters:

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.

Section 6: Accidental Release Measures [ Return to Top ]

Personal precautions, protective equipment and emergency procedures

For Non-Emergency Personnel:

Do not touch or walk through spilled material. Avoid breathing vapor or mist.
Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Put on appropriate personal protective equipment.

For Emergency Responders:

If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
See also the information in "For nonemergency personnel".

Environmental Precautions:

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
Water polluting material. May be harmful to the environment if released in large quantities.

Methods and Materials for Containment and Cleaning Up

Spill:

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

Section 7: Handling and Storage [ Return to Top ]

Precautions for Safe Handling

Protective Measures:

Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Avoid contact with used product. Do not reuse container.

Advice on General Occupational Hygiene:

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. See also Section 8 for additional information on hygiene measures.

Conditions for Safe Storage, Including any Incompatibilities:

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Section 8: Exposure Controls/Personal Protection [ Return to Top ]

Control Parameters

    Occupational Exposure Limits

  • Under conditions which may generate mists, the following exposure limits are recommended:
    ACGIH TLV TWA: 5 mg/m³ ; STEL: 10 mg/m³.

Appropriate Engineering Controls:

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Ensure that eyewash stations and safety showers are close to the workstation location.

Environmental Exposure Controls:

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.

Individual Protection Measures

Hygiene Measures:

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Ensure that eyewash stations and safety showers are close to the workstation location.

Eye/Face Protection:

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: chemical splash goggles.

Skin Protection

Hand Protection:

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Body Protection:

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Other Skin Protection:

Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Respiratory Protection:

Use a properly fitted, air-purifying or supplied air respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Section 9: Physical and Chemical Properties [ Return to Top ]


Physical State Liquid
Color Amber. [Light]
Odor Mild, Bland, Hydrocarbon Odor
Odor Threshold Not available.
pH Not available.
Melting Point / Pour Point -48°C(-54.4°F)
Boiling Point Not available.
Flash Point Open cup: 244°C (471.28°F) [Cleveland.]
Evaporation Rate Not available.
Flammability (solid, gas) Not available.
Lower and Upper Explosive (Flammable) Limits Not available.
Vapor Pressure Not available.
Vapor Density Not available.
Solubility in Water Not available.
Relative Density Solubility 0.8571
Partition Coefficient:
n-octanol/water
Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Kinematic: 0.556 cm²/s (55.6 cSt) (100°C)
Kinematic: 1.69 cm²/s (169 cSt) (40°C)

Section 10: Stability and Reactivity [ Return to Top ]


Reactivity:

No specific test data related to reactivity available for this product or its ingredients.

Chemical Stability:

The product is stable.

Possibility of Hazardous Reactions:

Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions to Avoid:

No specific data.

Incompatible Materials:

Reactive or incompatible with the following materials: oxidizing materials.

Hazardous Decomposition Products:

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Section 11: Toxicological Information [ Return to Top ]

Information on Toxicological Effects

Acute Toxicity

Product/Ingredient Name

Result

Species

Dose

Exposure

Zinc bis[O,O-bis(2-ethylhexyl)]
bis(dithiophosphate)
Triphenyl phosphite
LD50 Dermal
LD50 Oral
LD50 Oral
Rabbit
Rat
Rat
>5 g/kg
3.1 g/kg
444 mg/kg
-
-
-

Irritation/Corrosion

Product/Ingredient Name

Result

Species

Score

Exposure

Observation

Triphenyl phosphite Eyes - Mild Irritant
Skin - Severe Irritant
Skin - Moderate Irritant
Skin - Severe Irritant
Rabbit
Human
Rabbit
Rabbit
-
-
-
-
24 hours 500 mg
48 hours 125 mg
24 hours 20 mg
500 mg
-
-
-
-

Sensitization:

There is no data available.

Carcinogenicity:

There is no data available.

Specific Target Organ Toxicity (Single Exposure):

There is no data available.

Specific Target Organ Toxicity (Repeated Exposure):

There is no data available.


Aspirational Hazard

Name

Result

Mineral Oil ASPIRATION HAZARD - Category 1

Information on the likely routes of exposure:

Dermal contact. Eye contact. Inhalation. Ingestion.

Potential Acute Health Effects

Eye Contact:

Causes serious eye irritation.

Inhalation:

No known significant effects or critical hazards.

Skin Contact:

No known significant effects or critical hazards.

Ingestion:

Irritating to mouth, throat and stomach.

Symptoms related to the physical, chemical and toxicological characteristics

Eye Contact:

Adverse symptoms may include the following: pain or irritation, watering,redness

Inhalation:

No known significant effects or critical hazards.

Skin Contact:

No known significant effects or critical hazards.

Ingestion:

No known significant effects or critical hazards.

Delayed and immediate effects and also chronic effects from short and long term exposure

Short Term Exposure

Potential Immediate Effects:

No known significant effects or critical hazards.

Potential Delayed Effects:

No known significant effects or critical hazards.

Long Term Exposure

Potential Immediate Effects:

No known significant effects or critical hazards.

Potential Delayed Effects:

No known significant effects or critical hazards.

Potential Chronic Health Effects

General:

No known significant effects or critical hazards.

Carcinogenicity:

No known significant effects or critical hazards.

Mutagenicity:

No known significant effects or critical hazards.

Teratogenicity:

No known significant effects or critical hazards.

Developmental Effects:

No known significant effects or critical hazards.

Fertility Effects:

No known significant effects or critical hazards.

Numerical Measures of Toxicity

Acute Toxicity Estimates

Route:

ATE Value

Oral 168583.6 mg/kg

Section 12: Ecological Information [ Return to Top ]


Toxicity:

There is no data available.

Persistence and Degradability:

There is no data available.

Bioaccumulative Potential:
Product/Ingredient Name LogPow BCF Potential
Zinc bis[O,O-bis(2-ethylhexyl)] bis (dithiophosphate) 3.59 - low

Mobility in Soil
Oil/Water Partition Coefficient (KOC): There is no data available.
Other Adverse Effects: No known significant effects or critical hazards.

Section 13: Disposal Considerations [ Return to Top ]


Disposal Methods The generation of waste should be avoided or minimized wherever possible. Disposal of this product, solutions and any by-products should comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Waste should not be disposed of untreated to the sewer unless fully compliant with the requirements of all authorities with jurisdiction. Waste packaging should be recycled. Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling empty containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.

Section 14: Transport Information [ Return to Top ]


DOT Classification IMDG IATA
UN Number Not regulated. Not regulated. Not regulated.
UN Proper Shipping Name - - -
Transport Hazard Class(es) - - -
Packing Group - - -
Environmental Hazards No. No. No.
Additional Information - - -

AERG: Not applicable.


Special Precautions For User: Transport within user's premises: always transport in closed containers that are upright and secure. Ensure that persons transporting the product know what to do in the event of an accident or spillage.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not available.

Section 15: Regulatory Information [ Return to Top ]


U.S. Federal Regulations TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): All components are listed or exempted.
Clean Water Act (CWA) 307: Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate)
Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs) Not listed
Clean Air Act Section 602 Class I Substances Not listed
Clean Air Act Section 602 Class II Substances Not listed
DEA List I Chemicals (Precursor Chemicals) Not listed
DEA List II Chemicals (Essential Chemicals) Not listed
SARA 302/304: No products were found.
SARA 304 RQ Not applicable.
SARA 311/312
Classification Immediate (acute) health hazard

Composition/Information on Ingredients
Name Percentage Fire Hazard Sudden Release of Pressure Reactive Immediate (Acute) Health Hazard Delayed (Chronic) Health Hazard
Methacrylate Copolymer
Benzene, polypropene derivatives, sulfonated, calcium salts
Zinc bis[O,O-bis(2-ethylhexyl)] bis (dithiophosphate)
2-hydroxy-4-tetradecyl-1,3,2-dioxaborolane
Triphenyl phosphite
5 - 10
1 - 5

1 - 5

0.1 - 1
0.1 - 1
No.
No.

No.

No.
No.
No.
No.

No.

No.
No.
No.
No.

No.

No.
No.
Yes.
Yes.

Yes.

Yes.
Yes.
No.
No.

No.

No.
No.
SARA 313
Product Name CAS Number Percentage
Form R - Reporting Requirements Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate) 4259-15-8 1 - 5
Supplier Notification Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate) 4259-15-8 1 - 5

SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.


State Regulations
Massachusetts None of the components are listed.
New York None of the components are listed.
New Jersey The following components are listed: Distillates, hydrotreated heavy paraffinic; Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate)
Pennsylvania The following components are listed: Zinc bis[O,O-bis(2-ethylhexyl)] bis(dithiophosphate
California Prop. 65 No products were found.

International Regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Ingredient Name List Name Status
Not listed.

Montreal Protocol (Annexes A, B, C, E)
Ingredient Name List Name Status
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Ingredient Name List Name Status
Not listed.

Rotterdam Convention on Prior Inform Consent (PIC)
Ingredient Name List Name Status
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Ingredient Name List Name Status
Not listed.

International lists


Section 16: Other Information [ Return to Top ]


History
Date of issue mm/dd/yyyy 02/15/2014
Date of Previous Issue 10/15/2013
Version 5
Prepared By VENTURE PRODUCTS, INC.
Notice to Reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.