Ventrac Engine Oil

Premium Full Synthetc Engine Oil

Formulated to Provide Excellence

Ventrac Premium Full Synthetic Engine Oil 10W-30 is a commercial grade formulation designed for a broad range of operating temperatures. The advanced additives create a balanced package that helps extend equipment life and improve productivity with reduced down-time.

CAUTION:

Avoid prolonged skin contact with used motor oil, as it is a possible skin cancer hazard. Wash skin thoroughly with soap and water. Flush eyes with water for 15 minutes in case of contact. If swallowed, do not induce vomiting. Contact a physician immediately. KEEP OUT OF REACH OF CHILDREN. Do Not Pollute. Return used oil to collection centers.

Premium Full Sythetic Engine Oil Product Specification Sheet

Premium Full Synthetic Engine Oil SAE 10W-30
15.0037-1, 15.0037-CS, & 15.0037-55

Product Description

Full synthetic diesel engine oils formulated for a wide range of service including on and off-road, turbocharged, high horsepower and rigorous-duty where high quality and API CJ-4 license capability are important. Designed for use with all modern exhaust emission control systems. Meets the latest API and diesel engine performance specifications. Backwards-compatible for use with older engines. Suitable for use in gasoline engines (API SN) where appropriate.

Product Benefits

  • High levels of zinc and phosphorus additives protect against wear
  • Strong TBN neutralizes acids
  • Low sulfated ash (1% max) meets requirements for diesel particulate filters
  • High shear stability guards against viscosity loss and cylinder bore polishing
  • High dispersancy effectively controls soot thickening
  • High temperature durability resists oil degradation and deposits
  • Excellent cold flow properties improve start-up and efficiency
  • Compatible with conventional and synthetic diesel oils

 

Applications

Stock codes 15.0037-1, 15.0037-CS, and 15.0037-55 are API CJ-4 licensable products designed for diesel engines and certain gasoline engines requiring a listed specification in a SAE 10W-30 viscosity grade.


  15.0037-1
SAE Viscosity Grad 10W-30
API CJ-4, CI-4+, CF x
API SN, SM x
ACEA E9-08, E7-08 x
MB 228.31 x
Caterpillar ECF-3, ECF-2, ECF-1-a x
Cummins CES 20081 x
DDC 93K218  
Mack EO-O  
MAN 3575, 3275 x
MTU Type 2.1, Type I & II x
Volvo VDS-4, VDS-3 x
Renault RLD-3 x

Technical Data

Premium Full Synthetic Engine Oil SAE 10W-30

Test

ASTM
Procedure

Results

Stock Code

-

15.0037-1

SAE Viscosity

-

10W-30

Viscosity 100°C, cSt

D 445

12.0

Viscosity 40°C, cSt

D 445

81.3

Viscosity Index

D 2270

142

Cold Crank Simulator, cP

D 5293

5650
(-25)

Specific Gravity (g/ml)

D 1298

0.86

Density, (lb/gal)

D 1298

7.14

Color

D 1500

L4.0

Flash Point, °C (COC)

D 92

218

Fire Point, °C (COC)

D 92

232

Pour Point, °C (°F)

D 97

-38 (-36)

NOACK (%wt loss)

D 5800

9.4%

Four Ball Wear Test

D 4172

0.47

Total Base Number (TBN)

D 2896

9.0

Kurt Orbahn Shear Stability, 90 Pass (% viscosity loss)

D 6278

7.50%

HTHS (cP)

D 5481

3.5

Sulfated Ash, (wt%)

-

1.0%

Foam Tendency

D 892

-

SEQ I (ml)

-

0/0

SEQ II (ml)

-

10/0

SEQ III (ml)

-

0/0

Chemical Properties

METALS (wt%)

-

-

Calcium

-

.2380%

Phosphorus

-

.1100%

Zinc

-

.1230%


The information contained herein is believed to be accurate to the best of our knowledge at the time
of printing. It is supplied upon the express condition that the customer or user is responsible for determining the product’s suitability for a particular purpose. Products purchased from Venture Products, Inc. are subject to the terms and conditions set out in the sales contract, quotation, warranty, and/or order acknowledgement.

Health and Safety Information

For recommendations on safe handling and use of these products, please refer to the Safety Data Sheet (SDS), which is available upon request through Venture Products, Inc. at 1-886-836-8722.

Section 1: Product and Company Identification [ Return to Top ]

Product Label Name: Ventrac Premium Full Synthetic Engine Oil 10W-30

VENTRAC Product Code: 15.0037-1 (quart), 15.0037-CS (case of quarts), 15.0037-55 (drum)

Product Use: Lubricating oil. Not to be misted.


Supplier/Manufacturer:
Venture Products Inc.
500 Venture Drive
Orrville, Ohio 44667



In Case of Emergency:
CHEMTREC, U.S. : 1-800-424-9300
INTERNATIONAL +703-527-3887
Information: 330-682-0075

Section 2: Hazards Identification [ Return to Top ]


OSHA/HCS Status:

This material is considered hazardous by the OSHA Hazard Communication Standard (29 CFR 1910.1200).

Classification of the Substance or Mixture:

AQUATIC HAZARD (ACUTE) - Category 2
AQUATIC HAZARD (LONG-TERM) - Category 3

GHS Label Elements

Signal Word

No signal word.

Hazard Statements:

Toxic to aquatic life. Harmful to aquatic life with long lasting effects.

Precautionary Statements

Prevention:

Avoid release to the environment.

Response:

Not applicable.

Storage:

Not applicable.

Disposal:

Not applicable.

Hazards Not Otherwise Classified:

None known.

Section 3: Composition/Information on Ingredients [ Return to Top ]


Substance/Mixture:

Mixture

Other Means of Identification:

Not available.

CAS Number/Other Identifiers

CAS Number:

Not applicable.

Product Code

15.0037-1, 15.0037-55, 15.0037-C5

United States

Ingredient Name

Percent

CAS Number

Base Oil(s)*
Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbutyl and iso-Pr) esters, zinc salts
2,6-Di-tert-butylphenol
Cadmium
30 - 60
1 - 5
0.1 - 1
0 - 0.1
See Below
84605-29-8
128-39-2
7440-43-9

Any concentration shown as a range is to protect confidentiality or is due to batch variation.

There are no additional ingredients present which, within the current knowledge of the supplier and in the concentrations applicable, areclassified as hazardous to health or the environment and hence require reporting in this section.

Occupational exposure limits, if available, are listed in Section 8.

*Base Oil(s): 64742-54-7

Section 4: First Aid Measures [ Return to Top ]


Description of Necessary First Aid Measures

Eye Contact:

Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids.
Check for and remove any contact lenses. Continue to rinse for at least 20 minutes. Get medical attention if irritation occurs.

Inhalation:

Remove victim to fresh air and keep at rest in a position comfortable for breathing. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Maintain an open airway. Get medical attention if symptoms occur.

Skin Contact:

Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 20 minutes. Get medical attention if symptoms occur.

Ingestion:

Wash out mouth with water. If material has been swallowed and the exposed person is conscious, give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the lungs. Never give anything by mouth to an unconscious person. Get medical attention if symptoms occur.

Most Important Symptoms/Effects, Acute and Delayed

Potential Acute Health Effects

  • Eye Contact: No known significant effects or critical hazards.
  • Inhalation: No known significant effects or critical hazards.
  • Skin Contact: No known significant effects or critical hazards.
  • Ingestion: Irritating to mouth, throat and stomach.

Over-Exposure Signs/Symptoms

  • Eye Contact: No known significant effects or critical hazards.
  • Inhalation: No known significant effects or critical hazards.
  • Skin Contact: No known significant effects or critical hazards.
  • Ingestion: No known significant effects or critical hazards.

Indication of immediate medical attention and special treatment needed, if necessary

  • Notes to Physician: Treat symptomatically.
  • Specific Treatments: No specific treatment.
  • Protection of First-Aiders: No special protection is required.

Section 5: Fire Fighting Measures [ Return to Top ]


Extinguishing Media

Suitable
Extinguishing Media:

Use an extinguishing agent suitable for the surrounding fire.

Unsuitable
Extinguishing Media:

None known.

Specific Hazards Arising from the Chemical:

This material is harmful to aquatic life with long lasting effects.
Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.

Hazardous Thermal Decomposition Products:

No specific data.

Special Protective Actions for Fire-Fighters:

No special protection is required.

Special Protective Equipment for Fire-Fighters:

Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.


Section 6: Accidental Release Measures [ Return to Top ]


Personal precautions, protective equipment and emergency procedures

For Non-Emergency Personnel:

Put on appropriate personal protective equipment.

For Emergency Responders:

If specialized clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials.
See also the information in "For nonemergency personnel".

Environmental Precautions:

Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air).
Water polluting material. May be harmful to the environment if released in large quantities.

Methods and Materials for Containment and Cleaning Up

Spill:

Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local regulations (see Section 13). Dispose via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see Section 1 for emergency contact information and Section 13 for waste disposal.

Section 7: Handling and Storage [ Return to Top ]

Precautions for Safe Handling

Protective Measures:

Put on appropriate personal protective equipment (see Section 8). Do not ingest. Avoid contact with eyes, skin and clothing. Avoid breathing vapor or mist. Avoid release to the environment. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Empty containers retain product residue and can be hazardous. Avoid contact with used product. Do not reuse container.

Advice on General Occupational Hygiene:

Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. See also Section 8 for additional information on hygiene measures.

Conditions for Safe Storage, Including any Incompatibilities:

Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials (see Section 10) and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination.

Section 8: Exposure Controls/Personal Protection [ Return to Top ]


Control Parameters

    Occupational Exposure Limits

  • Under conditions which may generate mists, the following exposure limits are recommended:
    ACGIH TLV TWA: 5 mg/m³ ; STEL: 10 mg/m³.

Ingredient Name

Exposure Limits

Cadmium OSHA PEL Z2 (United States, 2/2013).
TWA: 0.2 mg/m³ 8 hours. Form: Dust
CEIL: 0.6 mg/m³ Form: Dust
CEIL: 0.3 mg/m³ Form: Fume
TWA: 0.1 mg/m³ 8 hours. Form: Fume
ACGIH TLV (United States, 6/2013).
TWA: 0.01 mg/m³, (as Cd) 8 hours. Form: Inhalable fraction
TWA: 0.002 mg/m³, (as Cd) 8 hours. Form: Respirable fraction
OSHA PEL (United States, 2/2013).
TWA: 5 μg/m³, (as Cd) 8 hours.

Under conditions which may generate mists, the following additional exposure limits are recommended:ACGIH TLV TWA: 5 mg/m³ ; STEL: 10 mg/m³.
Appropriate Engineering Controls

Good general ventilation should be sufficient to control worker exposure to airborne contaminants.

Environmental Exposure Controls

Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation.


Individual Protection Measures
Hygiene Measures

Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Ensure that eyewash stations and safety showers are close to the workstation location.

Eye/Face Protection

Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts.


Individual Protection Measures

Skin Protection

Hand Protection:

Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.

Body Protection:

Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Other Skin Protection:

Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.

Respiratory Protection:

Use a properly fitted, air-purifying or supplied air respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.

Section 9: Physical and Chemical Properties [ Return to Top ]


Physical State Liquid
Color Dark. [Brown]
Odor Mild Hydrocarbon.
Odor Threshold Not available.
pH Not available.
Melting Point / Pour Point -38°C(-36.4°F)
Boiling Point Not available.
Flash Point Open cup: 218°C (424.4°F) [Cleveland.]
Evaporation Rate Not available.
Flammability (solid, gas) Not available.
Lower and Upper Explosive (Flammable) Limits Not available.
Vapor Pressure Not available.
Vapor Density Not available.
Solubility in Water Not available.
Relative Density Solubility 0.8571
Partition Coefficient:
n-octanol/water
Not available.
Auto-ignition temperature Not available.
Decomposition Temperature Not available.
Viscosity Kinematic: 0.12 cm²/s (12 cSt) (100°C)
Kinematic: 0.813 cm²/s (81.3 cSt) (40°C)

Section 10: Stability and Reactivity [ Return to Top ]


Reactivity:

No specific test data related to reactivity available for this product or its ingredients.

Chemical Stability:

The product is stable.

Possibility of Hazardous Reactions:

Under normal conditions of storage and use, hazardous reactions will not occur.

Conditions to Avoid:

No specific data.

Incompatible Materials:

Reactive or incompatible with the following materials: oxidizing materials.

Hazardous Decomposition Products:

Under normal conditions of storage and use, hazardous decomposition products should not be produced.

Section 11: Toxicological Information [ Return to Top ]


Information on Toxicological Effects

Acute Toxicity

Product/Ingredient Name

Result

Species

Dose

Exposure

Phosphorodithioic acid, mixed O,Obis(1,3-dimethylbutyl and iso-Pr)
esters, zinc salts
Triphenyl phosphite
2,6-Di-tert-butylphenol

Cadmium
LD50 Oral


LD50 Dermal
LD50 Oral
LD50 Oral
Rat


Rabbit
Rat
Rat
3.2 g/kg


10 g/kg
1320 mg/kg
2330 mg/kg
-


-
-
-

Irritation/Corrosion

Product/Ingredient Name

Result

Species

Score

Exposure

Observation

Triphenyl phosphite Eyes - Mild Irritant
Skin - Severe Irritant
Skin - Moderate Irritant
Skin - Severe Irritant
Rabbit
Human
Rabbit
Rabbit
-
-
-
-
24 hours 500 mg
48 hours 125 mg
24 hours 20 mg
500 mg
-
-
-
-

Sensitization:

There is no data available.

Carcinogenicity:

There is no data available.

Specific Target Organ Toxicity (Single Exposure):

There is no data available.


Specific Target Organ Toxicity (Repeated Exposure):

Name

Category

Route of Exposure

Target Organs

Cadmium

Category 1

Not determined

Not determined


Aspirational Hazard

Name

Result

Distillates, hydrotreated heavy paraffinic
Mineral Oil
ASPIRATION HAZARD - Category 1
ASPIRATION HAZARD - Category 1

Information on the likely routes of exposure:

Dermal contact. Eye contact. Inhalation. Ingestion.

Potential Acute Health Effects

Eye Contact:

No known significant effects or critical hazards.

Inhalation:

No known significant effects or critical hazards.

Skin Contact:

No known significant effects or critical hazards.

Ingestion:

No known significant effects or critical hazards.

Symptoms related to the physical, chemical and toxicological characteristics

Eye Contact:

Adverse symptoms may include the following: pain or irritation, watering,redness

Inhalation:

No known significant effects or critical hazards.

Skin Contact:

No known significant effects or critical hazards.

Ingestion:

No known significant effects or critical hazards.

Delayed and immediate effects and also chronic effects from short and long term exposure

Short Term Exposure

Potential Immediate Effects:

No known significant effects or critical hazards.

Potential Delayed Effects:

No known significant effects or critical hazards.

Long Term Exposure

Potential Immediate Effects:

No known significant effects or critical hazards.

Potential Delayed Effects:

No known significant effects or critical hazards.

Potential Chronic Health Effects

General:

No known significant effects or critical hazards.

Carcinogenicity:

No known significant effects or critical hazards.

Mutagenicity:

No known significant effects or critical hazards.

Teratogenicity:

No known significant effects or critical hazards.

Developmental Effects:

No known significant effects or critical hazards.

Fertility Effects:

No known significant effects or critical hazards.

Numerical Measures of Toxicity

Acute Toxicity Estimates

Route:

ATE Value

Oral 191261.7 mg/kg

Section 12: Ecological Information [ Return to Top ]


Toxicity
Product/Ingredient Name Result Species Exposure
Cadmium Acute EC50 97 μg/l Fresh water

Acute EC50 0.095 mg/L Marine water
Acute EC50 200 μg/l Fresh water
Acute LC50 0.072 μg/l Marine water
Acute LC50 24 μg/l Fresh water
Acute LC50 1 μg/l Fresh water

Chronic NOEC 2 μg/l Fresh water

Chronic NOEC 0.02 μg/l Fresh water
Algae - Pseudokirchneriella subcapitata -
Exponential growth phase
Algae - Ulva pertusa
Aquatic plants - Lemna minor
Crustaceans - Amphipoda - Adult
Daphnia - Daphnia magna
Fish - Pimephales promelas - Juvenile
(Fledgling, Hatchling, Weanling)
Algae - Parachlorella kessleri -
Exponential growth phase
Fish - Cyprinus carpio
72 hours

96 hours
4 days
48 hours
48 hours
96 hours

72 hours

4 weeks

Persistence and Degradability

There is no data available.

Bioaccumulative Potential

Product/Ingredient Name

LogPow

BCF

Potential

Phosphorodithioic acid, mixed O,Obis
(1,3-dimethylbutyl and iso-Pr)
esters, zinc salts
2,6-Di-tert-butylphenol
0.56


4.5
-


-
low


high

Mobility in Soil

Soil/water partition coefficient (KOC)

There is no data available.

Other adverse effects

No known significant effects or critical hazards.

Section 13: Disposal Considerations [ Return to Top ]


Disposal Methods The generation of waste should be avoided or minimized wherever possible. Disposalof this product, solutions and any by-products should comply with the requirements ofenvironmental protection and waste disposal legislation and any regional local authorityrequirements. Dispose of surplus and non-recyclable products via a licensed wastedisposal contractor. Waste should not be disposed of untreated to the sewer unlessfully compliant with the requirements of all authorities with jurisdiction. Wastepackaging should be recycled. Incineration or landfill should only be considered whenrecycling is not feasible. This material and its container must be disposed of in a safeway. Care should be taken when handling empty containers that have not been cleanedor rinsed out. Empty containers or liners may retain some product residues. Avoiddispersal of spilled material and runoff and contact with soil, waterways, drains andsewers.

Section 14: Transport Information [ Return to Top ]


DOT Classification IMDG IATA
UN Number Not regulated. Not regulated. Not regulated.
UN Proper Shipping Name - - -
Transport Hazard Class(es) - - -
Packing Group - - -
Environmental Hazards No. No. No.
Additional Information - - -

AERG: Not applicable.


Special Precautions For User: Transport within user's premises: always transport in closed containers that areupright and secure. Ensure that persons transporting the product know what to do in theevent of an accident or spillage.
Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not available.

Section 15: Regulatory Information [ Return to Top ]


U.S. Federal Regulations United States inventory (TSCA 8b): All components are listed or exempted.
Clean Water Act (CWA) 307: Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbuty
and iso-Pr) esters, zinc salts; Benzene; Lead; Arsenic; Cadmium; Toluene
Clean Water Act (CWA) 311: Benzene; Toluene
Clean Air Act Section 112 (b) Hazardous Air Pollutants (HAPs) Not listed
Clean Air Act Section 602 Class I Substances Not listed
Clean Air Act Section 602 Class II Substances Not listed
DEA List I Chemicals (Precursor Chemicals) Not listed
DEA List II Chemicals (Essential Chemicals) Not listed
SARA 302/304: No products were found.
SARA 304 RQ Not applicable.
SARA 311/312
Classification Not applicable.

Composition/Information on Ingredients
Name Percentage Fire Hazard Sudden Release of Pressure Reactive Immediate (Acute) Health Hazard Delayed (Chronic) Health Hazard
Phosphorodithioic acid, mixed O,O-bis
(1, 3-dimethylbutyl and iso-Pr) esters, zinc salts
2,6-Di-tert-butylphenol
Cadmium
1 - 5

0.1 - 1
0 - 0.1
No.

No.
No.
No.

No.
No.
No.

No.
No.
Yes.

Yes.
Yes.
No.

No.
Yes.
SARA 313
Product Name CAS Number Percentage
Form R - Reporting Requirements Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbutyl and
iso-Pr) esters, zinc salts
Lead
84605-29-8

7439-92-1
1 - 5

0 - 0.1
Supplier Notification Phosphorodithioic acid, mixed O,O-bis(1,3-dimethylbutyl and
iso-Pr) esters, zinc salts
84605-29-8 1 - 5

SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall includecopying and redistribution of the notice attached to copies of the SDS subsequently redistributed.


State Regulations
Massachusetts None of the components are listed.
New York None of the components are listed.
New Jersey The following components are listed: Distillates, hydrotreated heavy paraffinic; Distillates, hydrotreated heavy paraffinic; Phosphorodithioic acid, mixed O,O-bis(1, 3-dimethylbutyl and iso-Pr) esters, zinc salts
Pennsylvania The following components are listed: Phosphorodithioic acid, mixed O,O-bis(1, 3-dimethylbutyl and iso-Pr) esters, zinc salts
California Prop. 65 WARNING: This product contains less than 0.1% of a chemical known to the State of California to cause cancer.
WARNING: This product contains less than 1% of a chemical known to the State of California to cause birth defects or other reproductive harm.

Ingredient name Cancer Reproductive No significant Risk Level Maximum Acceptable dosage Level
Toluene

Benzene

Lead
Arsenic
Cadmium
No.

Yes.

Yes.
Yes.
Yes.
Yes.

Yes.

Yes.
No.
Yes.
No.

6.4 μg/day (ingestion)
6.4 μg/day (ingestion)
15 μg/day (ingestion)
0.06 μg/day (inhalation)
0.05 μg/day (inhalation)
7000 μg/day (ingestion)
13000 μg/day (inhalation)
24 μg/day (ingestion)
49 μg/day (inhalation)
Yes.
No.
4.1 μg/day (ingestion)

International Regulations
Chemical Weapon Convention List Schedules I, II & III Chemicals
Ingredient Name List Name Status
Not listed.

Montreal Protocol (Annexes A, B, C, E)
Ingredient Name List Name Status
Not listed.

Stockholm Convention on Persistent Organic Pollutants
Ingredient Name List Name Status
Not listed.

Rotterdam Convention on Prior Inform Consent (PIC)
Ingredient Name List Name Status
Not listed.

UNECE Aarhus Protocol on POPs and Heavy Metals
Ingredient Name List Name Status
Not listed.

Section 16: Other Information [ Return to Top ]


History
Date of issue mm/dd/yyyy 12/30/2014
Date of Previous Issue 08/15/2013
Version 3
Prepared By VENTURE PRODUCTS, INC.
Notice to Reader

To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein.

Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these are the only hazards that exist.